Grizzly Feeder
Horizontal Type
SPECO Horizontal Grizzly Feeders are designed for regulating the feeding rate by separating materials for sizing, removing the unwanted, and bypassing the smaller size for the crusher to maximize the crushing capacity.

The vibrating unit consists of two unbalanced, counter-rotating shafts. They generate an elliptical motion throwing materials upward and forward with continuous turning actions.

The timing gears are adjustable to control the direction of the throw and the concentration of vibrating actions.
Features:
¯ Entire feeder mounted on spring to allow free vibration and absorb shock loads.
¯ Bolt-in adjustable grizzly bars to be able to space to users requirements in the field.
¯ Tapered grizzly bars to prevent binding and promote rapid discharge of under size materials.
¯ Driven by a variable-speed motor allowing adjustable feeding rates.
Type Feeder size
W x L FT(mm)
Max. Lump
Size IN(mm)
RPM Capacity T/H Motor HP
(kW)
Approx.
Weight LBS(kg)
SGF824 2 1/2x8 (800x2400) 18(450) 600~850 200~300 15-20 (11-15) 7,590 (3,450)
SGF943 3x4 (884x4300) 20(500) 600~850 300~400 20-30 (15-20) 9,790 (4,450)
SGF1150 4x16 (1134x5000) 22(550) 600~850 450~550 30-40 (22-30) 11,770 (5,350)
SGF1360 4x20 (1288x6000) 24(600) 600~850 600~700 40-55 (30-40) 14,080 (6,400)
SGF1560 5x20 (1500x6000) 40(1000) 600~850 700~800 50-67 (37-50) 15,510 (7,050)
Inclined Type
SPECO Inclined Grizzly Feeders are mainly applied for primary crushing plants.

They regulate the feeding rate by separating the materials for sizing, removing the unwanted, and bypassing the smaller size to maximize the crushing capacity. The vibrating unit consists of two counter-rotating shafts with counter-weights.

They lead to a linear vibrating motion with a 45 degree inclination to the horizontal feeding frame. Special design of grizzly bar opening to eliminate material clogging provides better sizing effect.

Wear-resistant electrode welding of the grizzly bars for longer feeding life.
Features:
¯ Four sets of load spring stands for the better stabilizing operation.
¯ Remote control of the feeding capacity by the variable-speed motor.
Type Feeder size IN(mm)
W x L
Max. Lump Size
IN(mm)
RPM Capacity T/H Motor HP
(kW)
Approx.
Weight LBS(kg)
SGF924 3 x 8 (900 x 2400) 18(450) 600~950 100~200 10 - 15 (7.5 - 11) 3,960 (1,800)
SGF1230 4 x 10 (1200x3000) 24(600) 600~950 160~320 15 - 20 (11 - 15) 7,700 (3,500)
SGF1542 5 x 14 (1500x4200) 32(800) 600~950 250~500 30 - 40 (22 - 30) 16,500 (7,500)





Jaw Crusher
SPECO Jaw Crusher is recommended for concrete recycling, river stones, tough ores, and other large lumps.
Features:
¯ Japanese or equivalent roller bearings provide strength & safety.
¯ Oil bath lubrication ensures longer service life.
¯ Toggle plate, toggle block, and toggle seat protect the crusher from damage caused by uncrushable material in the crushing chamber. This construction allows maintain a stable crushing angle.
¯ Simple & quick discharge gap adjustment, precise product grain distribution.
¯ Large & deep crushing chamber with sharp crushing angle, to achieve a very high crushing ratio.
¯ The bigger feed opening and longer pitman arm is especially suitable for primary crushing.
¯ Recommended for big lumps & large quantities, for primary crushing of limestone, river stone, tough ores, and concrete recycling.
Model No. Feed Opening in(mm)
L x W
RPM Motor HP
(kW)
Approx.
weight LBS(kg)
SJ-2416 24 x 16 (600 x 400) 275 40 - 55 (30 - 40) 14,080 (6,400)
SJ-3020 30 x 20 (750 x 500) 250 60 - 80 (45 - 60) 20,460 (9,300)
SJ-3624 36 x 24 (900 x 600) 250 80 - 100 (60 - 75) 31,020 (14,100)
SJ-4226 42 x 26 (1050 x 650) 260 100 - 120 (75 - 90) 37,840 (17,200)
SJ-4230 42 x 30 (1050 x 750) 230 120 - 155 (90 - 115) 45,100 (20,500)
SJ-4832 48 x 32 (1200 x 800) 230 155 - 200 (115 - 150) 58,630 (26,650)
SJ-4840 48 x 40 (1200 x 1000) 200 175 - 200 (130 - 150) 99,000 (45,000)
SJ-5432 54 x 32 (1350 x 800) 200 180 - 200 (135 - 150) 60,600 (27,550)
SJ-6040 60 x 40 (1500 x 1000) 200 150 - 300 (185 - 225) 110,440 (50,200)
SJ-6048 60 x 48 (1500 x 1200) 190 150 - 350 (185 - 265) 162,140 (73,700)

Model No. Cushing Capacity* closed side Discharge opening in (mm)
(TPH)
2(50) 2 3/4(70) 3(80) 4(100) 5(125) 6(150) 8(200) 9(250) 10(250) 12(300)
SJ-2416 26 38 45 60 75
SJ-3020 40 60 75 90 112 130
SJ-3624 105 130 160 182
SJ-4226 150 180 205 255
SJ-4230 180 210 237 294
SJ-4832 210 250 280 320 350
SJ-4840 265 302 370 402
SJ-5432 250 300 340 420 450
SJ-6040 310 350 440 480 510
SJ-6048 415 500 540 580 630





Cone Crusher
SPECO Cone Crushers are designed for secondary or tertiary crushing purposes both in stationary and portable applications for highly abrasive materials.
Features:
¯ The spring-loaded release system allows any uncrushable material to pass through without causing any damage.
¯ The lubrication unit is interlocked with the main motor for additional safety as a standard equipment.
¯ A rib liner is provided inside the bottom section of the frame to help protect it from wear.
Type Size(in) / Typre Max
Feed
Opening
(mm)
Min
Discharge
Opening in
(mm)
Rotation
(RPM)
Motor Power HP
(kW)
Weights LBS
(kg)
Capacity at closed side discharge opening size in
(mm)
(TPH)
1.4(6) 7/6(10) 1/2(13) 5/8(16) 3/4(19) 7/8(22) 1(25) 11/2(38) 2(51) 2 1/2
(64)
SMC600 24/coarse liner 3 3/4 (95) 7/16 (10) 630 50-60 (37-45) 11,660 (5,300) 20 25 30 35 45 50 76
SMF600 24/fine liner 2 3/4 (72) 1/4 (6) 630 50-60 (37-45) 11,660 (5,300) 18 20 25 30 35 40 45 60
SMC1000 40/coarse liner 6 1/2 (160) 1/2 (13) 630 120-150 (90-110) 23,760 (10,800) 80 100 135 150 175 235
SMF1000 40/fine liner 4 1/2 (115) 7/16(10) 630 120-150(90-110) 23,760(10,800) 65 75 90 120 135 150
SMS1000 40/short head 3 (80) 54/16 (8) 630 120-150 (90-110) 23,122 (10,510) 52 62 72 78 115
SMSS1000 40/ultra-fine
shorthead
2 (50) 1/4 (6) 630 120-150 (90-110) 23,122 (10,510) 50 55 65 70 102
SMC1150 45/coarse liner 7 (180) 1/2 (13) 610 150-175 (110-132) 29,773 (13,533) 115 135 150 180 200 260
SMF1150 45/fine liner 5 (130) 7/16 (10) 610 150-175 (110-132) 29,773 (13,533) 100 110 120 135 165 175
SMS1150 45/short head 3 1/2 (90) 7/16 (10) 610 150-175 (110-132) 29,773 (13,533) 80 105 110 140
SMSS1150 45/ultra-fine
shorthead
2 1/2 (60) 1/4 (6) 610 150-175 (110-132) 29,773 (13,533) 50 74 105 110 130
SMC1300 51/coarse liner 8 (200) 5/8 (16) 610 175-215 (132-160) 49,060 (22,300) 150 180 200 230 310 390
SMF1300 51/fine liner 6 (150) 1/2 (13) 610 175-215 (132-160) 49,060 (22,300) 115 145 160 190 210
SMS1300 51/short head 4 (102) 7/16 (10) 610 175-215 (132-160) 49,060 (22,300) 90 115 140 160
SMSS1300 51/ultra-fine
shorthead
2 3/4 (70) 5/16 (8) 610 175-215 (132-160) 49,060 (22,300) 88 110 135 155
SMC1370 54/coarse liner 8 1/2 (215) 3/4 (19) 610 250-295 (185-220) 57,860 (26,300) 200 220 260 350 440
SMF1370 54/fine liner 6 1/2 (160) 5/8 (16) 610 250-295 (185-220) 57,860 (26,300) 155 180 200 220
SMS1370 54/shorthead 4 1/2 (115) 1/2 (13) 610 250-295 (185-220) 83,050 (37,750) 180 210 235 255 275
SMSS1370 54/ultra-fine
shorthead
3 (76) 5/16 (8) 610 250-295 (185-220) 83,050 (37,750) 148 178 200 220
SMC1500 60/coarse line 9 1/4 (235) 7/8 (22) 560 250-300 (185-225) 97,460 (44,300) 330 390 525 655 725
SMF1500 60/fine liner 6 3/4 (175) 3/4 (19) 560 250-300 (185-225) 97,460 (44,300) 230 270 300 330
SMS1680 66/short head 5 1/2(140) 1/2 (13) 560 335-400 (250-300) 97,460 (44,300) 185 225 265 340
SMSS1680 66/ultra-fine
shorthead
3 3/4(95) 7/16(10) 560 335-400 (250-300) 97,460 (44,300) 180 220 260 335





SPECO High Speed Cone Crusher
Features:
¯ High capacity product with perfect shape and even sizing.
¯ Stress relieved frame: Heavy duty reinforcements are installed at high stress points.
¯ Hydraulic Adjustment to aid in quick Cone Crusher setting changes.
¯ Hydraulic clearing is standard on Cone Crushers with release cylinders to shorten the down time.
¯ NO filling in the concave to be replaced quickly and expediently.
¯ Automatic overload protection: If overloaded, the crusher can be restored automatically to keep the discharge opening and steady productive quality.
¯ SPECO Cone Crushers have a high capacity, external mounted lubrication pump, oil tank, oil filtering system, high oil temperature shut-down, low oil flow shut downs and an oil flow gauge. A heat exchanger is also available.
¯ Higher eccentric height for bigger crushing ratio and higher crushing efficiency.
¯ Concave locked to top cell from above, stable fixation, easy exchange.
¯ Higher rotation speed up to 800 rpm for higher capacity.
¯ Increased height of mantle & concave for more crushing efficiency.
¯ Increased stroke at the feed opening for higher crushing ratio and more throughput.
¯ Strong & tidy main frame, crusher sheave with high power transmission rate, for longer service life of the drive device.
Model
No.
Size(in)/Type Max.
Feed Opneing
(in/mm)
Min.
Discharge Opneing
(in/mm)
Motor Power HP
(kW)
Weight
LBS
(kg)
Capacity at closed side Discharge opening size in (mm)
(TPH)
1/2(13) 5/8(16) 3/4(19) 7/8(22) 1(25) 11/4(32) 11/2(38) 1 3/4(45) 2(51)
SHSP100(C) 36/coarse liner 5 in / 135mm 5/8 in / 16mm 100-150
(75-112)
14,960
(6,800)
75-85 80-95 85-100 90-110 100-130
SHSP100(F) 36/fine liner 4in / 105mm 5/8 in / 16mm 100-150
(75-112)
14,960
(6,800)
40-60 55-70 65-80 70-85 75-95 90-110
SHSP200(C) 42/coarse liner 7in / 185mm 3/4 in / 19mm 150-200
(110-150)
26.400
(12,000)
180-210 200-240 235-270 265-310
SHSP200(F) 42/fine liner 6in / 145mm 2/3 in / 17mm 150-200
(110-150)
26,400
(12,000)
145-165 160-195 185-220 210-245 230-280
SHSP200(S) 42/short head liner 2 3/4in / 70mm 1/2 in / 13mm 150-200
(110-150)
26,400
(12,000)
90-110 105-125 120-135 125-140 130-150 140-165
SHSP300(C) 48/coarse liner 8 1/2 in / 210mm 4/5 in / 22mm 250-300
(180-225)
41,140
(18,700)
210-240 230-280 270-320 290-350 320-380 360-430
SHSP300(F) 48/finer liner 7 in / 185mm 3/4 in / 19mm 250-300
(180-225)
41,140
(18,700)
190-220 205-230 225-260 245-285 270-330 300-350
SHSP300(S) 48/short head liner 3 1/2 in / 290mm 5/8 in / 16mm 250-300
(180-225)
41,140
(18,700)
135-155 150-170 165-185 180-200 200-220
SHSP400(C) 53/coarse liner 11 1/2 in / 290mm 5/8 in / 16mm 300-400
(220-300)
62,480
(28,400)
295-355 335-375 370-480 430-500 470-550
SHSP400(F) 53/fine liner 8 1/2 in / 210mm 4/5 in / 22mm 300-400
(220-300)
62,480
(28,400)
265-310 290-330 315-360 350-410 390-440
SHSP400(S) 53/short head liner 4 1/2 in / 110mm 5/8 in / 16mm 300-400
(220-300)
62,480
(28,400)
155-185 175-200 195-225 210-245 235-256




Dimension
Model
No.
Dimensions (mm)
A B C D E F
SHSP100 10 in / 264mm 44 in / 1119mm 42 in / 1060mm 57 in / 1450mm 63 in / 1610mm 105 in / 2667mm
SHSP200 17 in / 423 mm 57 in / 1445mm 50 in / 1255mm 71 in / 1808mm 82 in / 2075mm 116 in / 2945mm
SHSP300 16 in / 403 mm 62 in / 1583mm 58 in / 1471mm 84 in / 2126mm 95 in / 2407mm 128 in / 3252mm
SHSP400 19 in / 477mm 70 in / 1770mm 68 in / 1717mm 99 in / 2505mm 109 in / 2780mm 147 in / 3727mm
Horizontal Shaft Impact Crusher
Features:
¯ Has taken a patent in U.S.A.
¯ Three-Four Rows of Blow Bars.
¯ Extra large Feed Opening
¯ Rotor Assembly equipped with anti-skid device.
¯ Hammers with balanced counterweight
¯ Chrome Moly Shaft.
¯ Dual adjustable Curtains.
¯ Hydraulic Hood Opening.
¯ 150mm Bearing. Automatic adjustment Control.
¯ 45 degree Feed Chute with replaceable Liners.
¯ Solid Main Frame with heat treatment.
Type Working
Diameter of Rotor IN (mm)
Effective
Width of Rotor IN (mm)
Feed Opening IN (mm) Power HP (kW) Weights LBS (kg)
W x H
SIC102092 40 (1,020) 36 (914) 36 x 91 (930 x 800) 75 - 100 (55 - 75) 22,660 (10,300)
SIC102115 40 (1,020) 45 (1,143) 45 x 31 (1,160 x 800 ) 120 - 150 (90 - 110) 25,300 (11,500)
SIC102152 40 (1,020) 60 (1,524) 60 x 31 (1,540 x 800) 150 -175 (110 - 132) 29,370 (13,350)
SIC133076 52 (1,330) 30 (762) 30 x 42 (778 x 1,065) 75 - 100 (55 - 75) 25,080 (11,400)
SIC133092 52 (1,330) 36 (914) 36 x 42 (930 x 1,062) 120 - 150 (90-110) 30,580 (13,900)
SIC133115 52 (1,330) 45 (1,524) 45 x 42 (1,160 x 1,065) 175 - 215 (132 - 160) 35,200 (16,000)
SIC133152 52 (1,330) 60 (1,524) 60 x 42 (1,540 x 1,065) 250 - 300 (185 - 220) 42,900 (19,500)
SIC133184 52 (1,330) 72 (1,848) 73 x 42 (1,844 x 1,065) 250 - 300 (185 - 220) 48,400 (22,000)


Type Capacity at closed side discharge opening size in (mm)
(TPH)
3/4 (19) 1(25) 1 1/2(38) 2(51) 2 1/2(63) 3(76)
SIC102092 60 80 94 110 120 135
SIC102115 75 100 120 137 150 170
SIC102152 95 116 145 160 186 215
SIC133076 76 102 121 140 152 173
SIC133092 92 124 145 169 184 209
SIC133115 116 155 184 211 230 261
SIC133152 193 254 303 344 382 422
SIC133184 250 330 394 448 496 548





Vertical Impact Crusher
With high speed rotating impellers,
SPECO Vertical Shaft Impactor (‘VSI’) throws material out from center to circumference, by using the material’s own centrifugal force to cause impact with the impeller shoes or the anvil faces, resulting in rock-on-rock or rock-on-iron crushing.

With its wide operation range and first class performance it is the most effective and reliable crusher, especially suitable for fine crushing and medium fine crushing of grinding material, fire-resistant material, cement, quartz sand, steel grit, furnace cinder, copper ore, iron ore, gold ore, river gravel, concrete aggregate, asphalt aggregate, and brittle material. This highly effective and energy saving crusher is also a superior and first rate sand production equipment. It will save up to 50% of energy compared with traditional sand making machines.

SPECO VSI can be equipped with either closed rotors or open rotors by customer's request.
Features:
¯ High capacity product with perfect shape and even sizing.
¯ Stress relieved frame: Heavy duty reinforcements are installed at high stress points.
¯ Hydraulic Adjustment to aid in quick Cone Crusher setting changes.
¯ Hydraulic clearing is standard on Cone Crushers with release cylinders to shorten the down time.
¯ NO filling in the concave to be replaced quickly and expediently.
¯ Automatic overload protection: If overloaded, the crusher can be restored automatically to keep the discharge opening and steady productive quality.
¯ SPECO Cone Crushers have a high capacity, external mounted lubrication pump, oil tank, oil filtering system, high oil temperature shut-down, low oil flow shut downs and an oil flow gauge. A heat exchanger is also available.
¯ Higher eccentric height for bigger crushing ratio and higher crushing efficiency.
¯ Concave locked to top cell from above, stable fixation, easy exchange.
¯ Higher rotation speed up to 800 rpm for higher capacity.
¯ Increased height of mantle & concave for more crushing efficiency.
¯ Increased stroke at the feed opening for higher crushing ratio and more throughput.
¯ Strong & tidy main frame, crusher sheave with high power transmission rate, for longer service life of the drive device.
Max Feed Size IN(mm) Rotor Diameter IN (mm) Roctor Rotation Speed (rpm) Capacity Electric Power HP (kW) Weight (w/o Motor) LBS (kg)
1 (50) 32 (800) 1,200 - 1,800 rpm 35 -170 TPH 270 (200) 16,940 (7,700)





Vibrating Screen
Horizontal Type
SPECO Screens have extremely powerful linear vibrating motion and are imparted by two unbalanced eccentric shafts and weights.

The screens efficiently handle a large amount of materials, resist clogging, and suit best for classifying small granules.
¯ Stronger centrifugal force is generated out of advanced design and engineering.
¯ The fed-in materials move rapidly, so the screens can process more materials per certain size of the cloth than competitors.
¯ If damp material comes in SPECO screen can dewater it strongly and effectively.
Model Screen Size IN(mm) Deck Double Amplitude (mm) Vibrating Frequency (rpm) Power HP (kW) Weight LBS (kg)
SHS924D 3x8 (900x2400) 2 9.5 ± 0.5 950 7 (5.5) 3.564 (1,620)
SHS1230D 4x10 (1200x3000) 2 9.5 ± 0.5 950 15 (11) 5,610 (2,550)
SHS1230T 4x10 (1200x3000) 3 9.5 ± 0.5 950 15 (11) 6,490 (2,950)
SHS1536D 5x12 (1500x3600) 2 9.5 ± 0.5 950 20 (15) 7,480 (3,400)
SHS1536T 5x12 (1500x3600) 3 9.5 ± 0.5 950 25 (18.5) 10,230 (4,650)
SHS1848D 6x16 (1800x4800) 2 10.5 ± 0.5 950 40 (30) 15,180 (6,900)
SHS1848XT 6x16 (1800x4800) 3 10.5 ± 0.5 950 50 (37) 17,710 (8,050)
SHS2160XD 7x20 (2100x6000) 2 10.5 ± 0.5 950 50 (37) 19,580 (8,900)
SHS2160XT 7x20 (2100x6000) 3 10.5 ± 0.5 950 60 (45) 25,300 (11,500)
SHS2460XD 8x20 (2400x6000) 2 10.5 ± 0.5 900 60 (45) 23,210 (10,550)
SHS2460XT 8x20 (2400x6000) 3 10.5 ± 0.5 900 75 (55) 27,280 (12,400)



Inclined Type
SPECO Inclined Type screens are built in rugged construction to be stationed with a 15-degree angle in operating fields.

Their design is simple, and they are especially useful and economical in screening applications for coarse crushed stones and minerals.

The vibrating unit consists of an unbalanced eccentric shaft with added-on counterweights allowing for different stroke travels to generate a circle motion. Users can adjust the counterweights whenever necessary.

Compared to horizontal screens, the inclined screens need less power thanks to the 15-degree slope and gravity effect.
Model Screen Size IN(mm) Deck 3Double Amplitude (mm)3 Vibrating Frequency (rpm) Power HP (kW) Weight LBS (kg)
SVS1230T 4 x 10 (1200 x 3000) 3 10.5 ± 0.5 850 15 (11) 7,920 (3,600)
SVS1236T 4 x 12 (1200 x 3600) 3 10.5 ± 0.5 850 15 (11) 8,800 (4,000)
SVS1536T 5 x 12 (1500 x 3600) 3 10.5 ± 0.5 850 20 (15) 11,600 (5,300)
SVS1542T 5 x 14 (1500 x 4200) 3 10.5 ± 0.5 80 20 (15) 11,330 (5,150)
SVS1848T 6 x 16 (1800 x 4800) 3 10.5 ± 0.5 850 25 (18.5) 15,290 (6,950)
SVS2148T 7 x 16 (2100 x 4800) 3 10.5 ± 0.5 800 25 (18.5) 16,170 (7,350)
SVS2160T 7 x 20 (2100 x 6000) 3 10.5 ± 0.5 800 40 (30) 19,719 (8,963)
SVS2460T 8 x 20 (2400 x 6000) 3 10.5 ± 0.5 800 50 (37) 20,900 (9,500)